Αποτελέσματα αναζήτησης:

mining rock drill button

20 Βρέθηκαν προϊόντα

Τρυπώντας με τρυπάνι κομμάτι σφυριών βράχου κουμπιών DTH τρυπανιών βράχου μεταλλείας καρβιδίου υψηλού βολφραμίου

High Pressure Tungsten Carbide Mining Rock Drill Button DTH Bit DTH Rock Drilling Hammer Bit Down-the-hole (DTH) hammer bits are used with Down-the-hole hammers for drilling holes through a wide range of rocks types. In conjunction with DTH hammers, drill hammer bits are designed with a splined drive for rotating the bit in the ground. Drill bits are available in different sizes and different styles so they can drill a wide range of hole sizes. Our variety of Down the Hole

Σμίλη 36mm τρυπανιών βράχου εξάγοντας εκλεπτυμένα εργαλεία διατρήσεων σφυριών του Jack κομματιών

Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Drillers choose tapered cross type bits if the goal is to minimize hole deviation in small hole range drilling. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit from spinning. Used in drifting and tunneling. Taper drill bit- Taper 7° Taper, 11°, Taper 12° Product Name: mining

28mm 7 βαθμός 5 κομμάτια τρυπανιών βράχου κουμπιών 34mm εκλεπτυμένα μπιτ σφυριών του Jack

Excellent Material 28mm 7 Degree 5 Button Bit 38mm Rock Drill Bits 34mm 8 Buttons 7 Degree Tapered Jack Hammer Bits General introduction: Rock Drilling Tools ProDrill, Taper button bit as small hole rock drill bits are different with thread button bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Product information: -Name:Tapered Button Bits for quarrying, mining, tunneling

τρι κώνος 34mm 11 βαθμός κομμάτι τρυπανιών βράχου 7 βαθμού της διάτρησης βράχου σφυριών του Jack μεταλλείας

34 mm tricone 11 degree 7 degree rock drill bit of mining jack hammer for rock drilling Product Description Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit Diameter:Diameter 32mm,34mm,36mm, 38mm,40mm (3)Tapered connection: 6 degree, 7 degree, 11 degree, 12 degree etc. SPECIFICATION FOR

Ποιότητα μέρη 32mm εγκαταστάσεων γεώτρησης τρυπανιών CE εκλεπτυμένο κομμάτι τρυπανιών κουμπιών σφυριών του Jack τρυπανιών σκληρής ροκ κνημών λατομείων 34mm ο Stone Εργοστάσιο

μέρη 32mm εγκαταστάσεων γεώτρησης τρυπανιών CE εκλεπτυμένο κομμάτι τρυπανιών κουμπιών σφυριών του Jack τρυπανιών σκληρής ροκ κνημών λατομείων 34mm ο Stone

7 tapered button drill bit wear resistant 34mm tungsten carbide rock tapered drill bit Our tapered button bit was from high quality cemented carbide and produced with heat treatment technology,which connected with tapered drill rod well for air leg or hand-held rock drill machine for drilling holes in gold and coal mining,marble and granite quarries,stone project, tunnel, water conservancy,etc. Feature: 1.High performance,durable quality ,competitve price 2.Wear Resistant

Μέρη 32mm εγκαταστάσεων γεώτρησης τρυπανιών Dth ορυχείου χρυσού μυτερό κομμάτι κουμπιών 7 βαθμού

32mm 7 Degree 7 Button Taper Button Bit For Gold Mine Dth Drilling Rig Different rock formation and rock drills require different taper angles. For low impact rock drills and softer rock formation, a narrow taper angle of 7° is used. A 7° can also be used if bit spinning is a problem when using 11° and 12° equipment. As a small hole drilling tools in a real jobsite, Acedrills' 32mm 7° taper button bit is good for drilling quarry and gold mine, at present, our products have

6 κουμπιά 7 μοιρών 11 μοιρών αεροσυμπιεστής τρυπάνι βράχου κωνικό τρυπάνι κωνικό τρυπάνι

6 Buttons 7 Degree 11 Degree Air Compressor Rock Drill Taper Button Bits Taper Shank Drill Bit Mining Tapered Rock Button Bit About our Products 1.All button bits raw material produced. 2.Simple structure and not broken easily 3.Hole straightness, high speed and deep hole drilling 4.Good flushing effect to ensure high drilling rate Product Description Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air

Ποιότητα μέρη 8 κομμάτι τρυπανιών βράχου σφυριών του Jack δοντιών 32mm εγκαταστάσεων γεώτρησης τρυπανιών 38mm 34Mm εκλεπτυμένο κομμάτι τρυπανιών Εργοστάσιο

μέρη 8 κομμάτι τρυπανιών βράχου σφυριών του Jack δοντιών 32mm εγκαταστάσεων γεώτρησης τρυπανιών 38mm 34Mm εκλεπτυμένο κομμάτι τρυπανιών

38mm 8 teeth high quality jack hammer rock drill bit 32mm 34 mm tapered drill bit Product Description Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit Diameter:Diameter 32mm,34mm,36mm, 38mm,40mm (3)Tapered connection: 6 degree, 7 degree, 11 degree, 12 degree etc. Tapered button bit Diameter

7 βαθμός 4 εκλεπτυμένο κομμάτι κουμπιών καρβιδίου άκρες για το σφυρί γρύλων

7 Degree 4 Carbide Tips Tapered Button Bit For Jack Hammer 7 tapered button drill bit wear resistant 34mm tungsten carbide rock tapered drill bit Our tapered button bit was from high quality cemented carbide and produced with heat treatment technology,which connected with tapered drill rod well for air leg or hand-held rock drill machine for drilling holes in gold and coal mining,marble and granite quarries,stone project, tunnel, water conservancy,etc. Feature: 1.High

Πρώτα 1 2 3 Τελευταίος